220HP bulldozer Shantui Bulldozer Machinery SD22 SD32 Bull Dozer Parts Similar Original Factory Low Fuel Consumption 23ton
Weight of the whole machine |
23450kg |
Engine model |
II |
Power |
175kw/1800rpm |
Blade capacity |
6.4m³ |
220 horsepower series
SD22 series bulldozers adopt advanced technologies such as centralized lubrication, centralized pressure measurement, automatic tensioning of tracks, etc., and can be equipped with various working devices and cabs to meet the working requirements of various working conditions. They are ideal and efficient working equipment for earthwork construction and bulk material shoveling.
SD22 Standard bulldozer
Re-launch QSNT-C235 engine, with strong power, high efficiency and energy saving
High-reliability power shift gearbox, stable hydraulic torque converter and final drive with two-stage straight tooth structure can transmit power efficiently, with high transmission power and high production efficiency.
Ensure that the engine can work normally and reliably under any load conditions and any thermal environment required by users without causing the engine to overheat.
Automatic fault diagnosis and whole-process monitoring can be realized. Integral cast dashboard, integrating air conditioning, electrical appliances and instruments, is more beautiful and upscale.
The main frame with full box structure is made of high-performance materials and high-strength castings, which has high impact load bearing and bending and torsion resistance. High-quality welds ensure the whole life cycle of the main frame.
Semi-rigid suspension walking system increases the ground contact area of the crawler and improves the traction of the vehicle.
According to ergonomics, the driver's seat and armrest can be easily adjusted up and down, and the speed change, steering and throttle control are placed on the left side, and the flexible shaft structure is adopted, and the working installation control is placed on the right side, and the servo control system is adopted to make the control process more light and flexible and reduce fatigue.
The standard straight-tilting bulldozer has strong cutting force, which can cope with all kinds of difficult working environments: a large single-tooth scarifier with adjustable penetration angle can be used for loosening soil layers such as clay and frozen soil, as well as stripping hard working surfaces such as gravel and hardened salt mines.
SD22F Forest logging bulldozer
SD22F forest logging bulldozer is developed according to the needs of forest working environment, and equipped with a special logging anti-rolling cab.
Special logging anti-rolling driving shed and cab, which can be equipped with wide (610mm) track belt and mechanical winch, has good passing performance and self-rescue performance, and is suitable for logging, skidding and dragging transportation operations in rainforest and forest farms.
The standard logging shovel can effectively clear all kinds of thorny obstacles on logging roads. The winch is used to drag trees and bulldozers to save themselves in forest operations, and its self-rescue function can be operated. The author's safety is guaranteed.
SD22R Sanitation bulldozer
SD22R environmental protection bulldozer is developed according to the operation needs of urban environmental protection treatment plants in China. It adopts wetland bulldozer chassis, which effectively reduces the specific grounding pressure and has good passing performance. It is very suitable for landfill and compaction of domestic garbage with high water content.
Equipped with large-capacity sanitation shovel and mud scraping device, which can effectively improve working efficiency. The unique heightening part on the upper part of the blade can prevent the working materials from entering the rear side of the blade.
Equipped with special equipment such as high warning light, reversing alarm bell, camera and LCD screen, which greatly improves the safety of field operation.
Equipped with centralized lubrication, centralized pressure measurement and automatic crawler tensioning system to facilitate on-site inspection and maintenance of equipment.
SD22S Wetland bulldozer
SD22S wetland bulldozer is designed and developed according to the characteristics of wetland working conditions, and can work normally in soft soil and muddy soil conditions that ordinary models can't enter.
The wet steering clutch and brake can prolong the service life, and they are linked with each other to ensure the quick and flexible steering behavior controlled by the handle.
910mm wetland crawler belt and extended trolley are adopted, which can effectively reduce the grounding specific pressure and have good wetland passing performance, and are suitable for soil work in muddy areas such as swamps and beaches
Detailed parameters
Model |
SD22R |
SD22 S |
SD22F |
SD22 |
length× width× quotient (nm) |
6290 × 4365 × 3395 |
6290 × 4365 × 3395 |
606 1 × 4200 × 3703 |
5390 × 3735 × 3350 |
Service weight (excluding scarifier) |
26000 |
25700 |
24000 |
23500 |
Engine model |
NT855-C280S10 QSNT-C235 |
NT855-C280S10 QSNT-C235 |
NT855-C280S10 QSNT-C235S30 |
NT855-C280S10 QSNT-C235 |
Power/Rated number of revolutions |
175/1800 |
175/1800 |
175/1800 |
169/2000 |
Grounding length and grounding specific pressure |
3480 |
3480 |
2730 |
2840 |
0.041 |
0.041 |
0.077 |
0.078 |
Cheek slope performance (") |
30 |
30 |
30 |
30 |
Number of belt plates |
45 |
45 |
38 |
39 |
Width of spreading plate |
910 |
910 |
560(660) |
560 |
Belt center distance (mom) |
2250 |
2250 |
2000 |
2000 |
Taper rail pitch (mm) |
216 |
216 |
216 |
216 |
Number of rollers (per side) |
2 |
2 |
2 |
2 |
Number of rollers (per side) |
8 |
8 |
6 |
7 |
Blade type |
Sanitation shovel |
Straight slope protection |
Push coal |
half u |
Guard length x height (mm) |
4365 × 1887 |
4365 × 1287 |
4200 × 1317 |
3735 × 1310 |
3725 × 1317 |
U :3860 × 1381 |
U : 3800 × 1345 |
|
U:3725 × 1376 |
|
utter guard capacity (m) |
12 |
6.8 |
9.1 6.5 U7.5 U7.0 |
7.8 U8.4 |
C Blade lifting height (mm) |
1330 |
1330 |
1210 |
1210 |
Blade depth (mm) |
550 |
550 |
540 |
540 |
Type of scarifier Loosening depth (mm) |
/ |
/ |
/ |
/ |
Loosening device lifting distance (m) |
|
/ |
/ |
/ |
Forward speed of eac |
/ |
/ |
/ |
/ |
h gear (km/h) |
|
F1 :0~3.6 |
F1 :0 ~ 3.6 |
F1 :0~3.8 |
F2 :0~6.5 |
F2 :0~6.5 |
F2 :0 ~ 6.5 |
F2 :0~6.8 |
F3 :0~11.2 |
F3 :0~11.2 |
F3 :0 ~ 11.2 |
F3 :0~11.8 |
|
|
|
|
|
|
|
|
Speed of reverse gears (km/h) |
R1 :0~4.3 |
R1 :0~4.3 |
R1 :0 ~ 4.3 |
R1 :0~4.9 |
R2 :0~7.7 |
R2 :0~7.7 |
R2 :0 ~ 7.7 |
R2 :0~8.5 |
R3 :0~13.2 |
R3 :0~13.2 |
R3 :0 ~ 13.2 |
R3 :0~14.3 |
|
|
|
|
Shanbo Construction Machinery Equipment (Shandong) Co., Ltd. is located in Jining, Shandong, the hometown of construction machinery manufacturing, with a registered capital of 50 million yuan. It is a leading domestic construction equipment manufacturer integrating R&D, manufacturing and sales. It mainly produces and sells Excavators, bulldozers, construction machinery.
The factory is located in the Economic Development Zone of Jining City, Shandong Province, covering an area of about 40,000 square meters, with more than 100 employees. The new factory consists of parts warehouse, forging workshop, assembly workshop, testing area and office building. The annual production capacity can reach 2000 units to meet the needs of domestic and international markets. With the strong technical support of Shanbo R&D team, Shanbo machinery is manufactured in strict accordance with international quality and safety standards, which can cope with the most extreme weather conditions and complex terrains. One year or 2000 hours long-term warranty and high-quality after-sales service provide customers with the best experience.
Today, our company's products are exported to more than 50 countries and regions around the world.
1. Who are we?
We are based in Shandong, China. Since 2011, we have sold to Southeast Asia, South America, East Asia, Africa, North America, South Asia, Eastern Europe, Western Europe, Middle East, Oceania, Central America, Northern Europe, Southern Europe and the domestic market. There are about 11-50 people in total in our office.
2. How can we guarantee the quality?
Always have pre-production samples before mass production;
Always carry out final inspection before shipment;
3. What can you buy from us?
Excavator parts, construction machinery parts, excavators, bulldozers, loaders, graders and other earthwork engineering machinery and equipment
4. What services can we provide?
Accepted delivery terms: FOB, CFR, CIF;
Accepted payment currencies: USD, EUR, CAD;
Accepted payment methods: T/T, L/C, D/P D/A;
Languages spoken: English, Chinese, Spanish, Russian